Sam Holmes Sailing · vidéo

Ce que couvre cette vidéo

Sam Holmes sails his catamaran through a rough overnight anchorage near an unnamed rock, then pushes upwind in 24 knots apparent wind with a second reef in, covering a passage toward Tulaga and Langkawi in Malaysia.▶ 0:26 Two gear failures occur offshore: an electric winch repair that lasted roughly 500 miles before failing again, forcing manual operation, and a whisker bowsprit support pad eye that came loose.▶ 3:20 A sail locker portlight broke open at sea, flooding the locker with two inches of water and soaking the headsail; Holmes dries the sail by hoisting it at anchor after hosing it down at a marina dock.▶ 5:22 At Langkawi he beaches the boat on a falling tide to scrub the waterline by hand.▶ 8:13 Maintenance work at the Royal Langkawi Yacht Club includes replacing the flooded sail locker portlight using a 3D-printed router template and acrylic sheet, drilling drains into leaking side portlight water-catchment troughs using a custom drill jig and thickened epoxy, grinding off slippery non-skid on the coach roof ramp, and removing deck studs that caused soft spots in the cabin.▶ 10:32 He also 3D-prints a prototype headboard separator to detach the sail from the top cars, estimating the part costs $2–3 in plastic versus roughly $500–$1,000 from commercial suppliers including Harken.▶ 12:11

Plus de vidéos de Sam Holmes Sailing

We like this evolution of the Tender - Exce1sior carbon dinghy testjuin 2026A great catamaran sunshade solution mai 2026Venomous snake onboard! We hit a reef exploring the Andaman Islands & Scuba on a giant shipwreckmars 2026Sailing with a stop to get our advanced scuba ratingmars 2026

De Sam Holmes Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.