Sailing Catalpa · vidéo

Ce que couvre cette vidéo

Lee and the crew of Catalpa perform two major maintenance tasks: installing a new radar unit on the mizzen mast and organizing a chaotic engine-room wiring loom. To mount the radar, Lee fabricates a custom jig to align the offset bolt holes on the mast bracket.0:32 After failing to pull the radar cable up through the mast, the crew successfully feeds it from the top down.5:48 Lee then addresses a "bird's nest" of unidentified, melted, and cut wires near the engine, consolidating them onto a terminal block to improve system reliability and simplify future troubleshooting.8:01 To trace unknown wires, Lee uses a multimeter set to the continuity (ohm) setting.11:01 He employs a 50-meter spool of spare wire as a long-reach lead, attaching one end to the target wire and the other to the multimeter.12:00 Using alligator clip leads allows him to perform these tests solo.12:06 The process confirms that systematic labeling and fusing of all circuits is essential for preventing electrical shorts and fire hazards on older vessels.9:12

Plus de vidéos de Sailing Catalpa

arriving to the most remote atolls on earth...the Tuamotussept. 2026they weren't expecting thissept. 2026one of the most remote islands on the planetsept. 202629 days sailing Panama to French Polynesia the whole passageaoût 2026

De Sailing Catalpa — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.