Sailing Good, Bad, and Ugly · vidéo

Ce que couvre cette vidéo

Matt and Kristen continue their mudroom cabinet build by installing Blum undermount drawer slides and constructing custom drawer boxes.4:53 To improve the consistency of their poplar face frame cuts, Matt replaces the radial arm saw blade with a higher-tooth count model and buries the blade deeper into the base to minimize side-to-side vibration.12:29 The pair uses 1/2-inch Baltic birch for the drawer sides to reduce weight and stress on the slides, while 1/4-inch plywood serves as the drawer bottoms.14:01 Matt creates a custom jig to ensure the 3/8-inch setback required for the Blum slides, using a square piece of wood to maintain consistent alignment across all eight drawer sets.9:38 During the process, a router table fence clamp failure causes a minor tear-out error on one drawer, which the team repairs with wood filler.17:07 The final assembly involves gluing and screwing the boxes, followed by clicking the completed drawers onto the tracks for a soft-close fit.20:42 Proper blade depth and consistent jig usage significantly improve the precision of the cabinet components.

Plus de vidéos de Sailing Good, Bad, and Ugly

Infested, Moldy Disaster to Dream Transformation Start to Finishsept. 2026IT’S FINALLY DONE!sept. 2026We Needed a Win and This Wasn’t Itaoût 2026The End Is Finally Nearaoût 2026

De Sailing Good, Bad, and Ugly — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.