Sailboat Magazine · vidéo

Ce que couvre cette vidéo

Tuning a sailboat rig requires a systematic approach to tensioning shrouds while maintaining mast alignment, or "column," to ensure structural integrity for ocean voyaging. On a Creel F-37, the process begins in the slip by using a Loos tension gauge to measure the load on 1x19 stainless steel cable.8:05 The skipper tensions the lower aft shrouds to pull the mast into column, adjusting turnbuckles in half-turn increments while sighting the mast profile to monitor for bends.9:31 Proper preload typically targets 14 to 15 percent of the cable's breaking strength.11:39 Centering the mast athwartships involves using a non-stretching line, such as Dyneema, or a jib halyard marked at a consistent point, measured against fixed, symmetrical points like stanchion bases on both port and starboard.17:59 Rig maintenance also necessitates inspecting terminal fittings, clevis pins, and chain plates for corrosion, rust, or hairline cracks using a 10x magnifying glass.6:04 A properly tuned rig prioritizes safety margins and structural robustness over racing performance.2:11

Plus de vidéos de Sailboat Magazine

Pacific Loop Solo Sailor Bruce Maunsellmai 2026Full Keel Sailboat vs Fin Keel/Spade Rudder For Crossing Oceans 🤔oct. 2025They're In!!! Our New Solid Lifelines!sept. 2025🧐 You Tell Me! Solid Or Cable Lifelines!? Bulwarks Or Toerails?août 2025

De Sailboat Magazine — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.