The On Deck Channel · vidéo

Ce que couvre cette vidéo

Installing an ARCO Zeus Omega alternator regulator involves mounting the control module and alternator drive module (ADM), connecting the stator and field wires, and attaching a Hall effect sensor to the battery or alternator cable to measure current.3:09 On a Leopard 50 catamaran, the system requires one control module and an ADM for each engine, linked by NMEA 2000 cables.4:27 When installing on a case-ground alternator, the temperature sensor must be placed on the terminal stud first, followed by the regulator’s ring terminals, to ensure proper contact.6:19 The control module should be mounted in a location with clear line-of-sight for Bluetooth and Wi-Fi connectivity, while keeping the voltage-sensing power wires relatively short to minimize voltage drop.12:24 The system supports optional inputs for traditional shunts, battery temperature probes, and ignition sources, though most installations only require the primary power and sensor connections.13:44 Proper strain relief for cables at the alternator is critical to prevent vibration-induced stud failure.9:18

Bateaux dans cette vidéo

Plus de vidéos de The On Deck Channel

24 shipping containers. A lot more than rigging!août 2026Moving from a Full Size Kitchen to a Boat Kitchen | New to Boat Life Seriesaoût 2026Quick Overview of Marine Heads on Aluminum Boats | New to Boat Life Seriesaoût 2026Sails Have Not Been Raised Since 2012 | Relax, Kick Back & Come for a Sail on Nomadjuil. 2026

De The On Deck Channel — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.