Sailing Britaly · vidéo

Ce que couvre cette vidéo

Replacing stainless steel sheathed lifelines with Dyneema on the 38-ft vessel Britaly involves removing existing turnbuckles and threading the new line through stanchion apertures.1:09 To prevent chafe, all stanchion holes must be smoothed with 80-grit sandpaper to remove metal burrs.2:38 The installation process uses a 12-strand eye splice, with the tail buried and tapered to maintain strength and prevent fiber fatigue at the transition point.8:34 A stainless steel thimble is inserted into the cockpit-end eye to reduce friction during lashing.14:07 The lashing itself is secured using a figure-eight pattern and half-hitches, which provides sufficient tension without requiring turnbuckles or low-friction rings.20:53 Because Dyneema is susceptible to heat damage, heat shrink should be avoided; sacrificial whipping with smaller-diameter line serves as a better chafe guard against stanchions.3:15 The material is lightweight, cost-effective, and user-friendly for DIY installation. Dyneema lifelines require periodic re-tensioning as the material settles and stretches after initial installation.21:15

Plus de vidéos de Sailing Britaly

Goodbye Belgium: Hello FRANCE! ⛵Sailing Britaly⛵févr. 2026Belgium's Waterways Are UNDERRATED! ⛵ Sailing Britaly ⛵janv. 2026Boat Life on The Inland Waterways | ⛵ Sailing Britaly ⛵oct. 2025Hitching a Ride on a GIANT Elevator... For BOATS! ⛵ (Ronquieres Inclined Plane)sept. 2025

De Sailing Britaly — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.