TIPS Season 3 - Episode 5: How to sharpen and rip with a chainsaw
14 juin 2020 · 22 min · 109K vues
Ce que couvre cette vidéo
To process a large oak knee for a 23-foot V-bottom skiff, a chainsaw is modified for ripping by filing the teeth at a 10-degree angle rather than the standard 35-degree cross-cut angle.2:29 This adjustment creates a narrower kerf and reduces side-pull, allowing for more efficient material removal when cutting with the grain.2:44 Before cutting, the bark is removed with an adze to prevent dirt from dulling the chain.7:41 The log is elevated on cribbing to ensure the bar does not strike the ground during deep cuts. When the saw begins to bind in the narrow slot, a wedge is inserted into the cut to open the kerf and prevent the bar from pinching.10:39 By making three parallel cuts, the wood is split to produce bookmatched quarter knees with grain that follows the natural curve of the tree.13:44 A sharp, properly tuned chain allows a smaller chainsaw to perform heavy-duty milling tasks that would otherwise require a larger saw or a band mill.12:38
Plus de vidéos de Tips from a Shipwright
De Tips from a Shipwright — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.