Sailing Jibsea · vidéo

Ce que couvre cette vidéo

Replacing Yanmar engine mounts on a custom aluminum sailboat requires careful planning to avoid lifting the engine with jacks or hoists.11:10 By decoupling the prop shaft and removing mounts one at a time, the engine can be tilted slightly to provide clearance for bracket removal.11:17 Before installation, ensure the correct rubber density is used for each side; in this case, 200-density mounts were installed on the port side and 150-density on the starboard side.16:21 Using a feeler gauge at the shaft coupling during reinstallation ensures proper alignment.15:21 Applying anti-seize compounds like LanoCote or Tef-Gel to bolts prevents corrosion on dissimilar metals.16:08 Additionally, the crew replaced a heavy, cumbersome hard dinghy with a lighter inflatable model after testing both with a 9.8-hp Tohatsu outboard.6:10 The hard dinghy proved too difficult to maneuver on and off the deck without assistance, whereas the inflatable offered easier handling for off-grid living.7:39

Plus de vidéos de Sailing Jibsea

Reality of YouTubing + Sailing + Adventuring | Behind the Scenes - Ep 287sept. 2026Our Backyard Is Norway’s Most Iconic Fjord - Ep 286sept. 2026The Unpredictable Dangers of Sailing Norway's Fjords - Ep 285sept. 2026HOVERAir X1 PROMAX: 3 Month Honest Drone Reviewaoût 2026

De Sailing Jibsea — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.