Should My Battery Isolator Have Diodes or FETS?
26 février 2023 · 7 min · 11K vues
Ce que couvre cette vidéo
Older diode-based battery isolators cause a 0.7-volt drop in charging current, which often prevents electronics battery banks from reaching a full charge.1:37 This voltage loss, combined with typical line resistance and low alternator output at idle, can result in a net-negative charge state when high-draw equipment like chart plotters, radar, or pot pullers are active.5:09 Diode isolators are identifiable by the large heat sinks required to dissipate the energy lost as heat.1:03 Replacing these units with modern FET-based (Field Effect Transistor) isolators significantly improves charging efficiency by minimizing voltage drop.3:21 Jeff Cote recommends installing a battery monitor to track real-time current flow and verify that alternator output exceeds total vessel loads, especially during low-RPM operation.6:00 Replacing inefficient diode-based isolators with FET-based models ensures more alternator power reaches the battery banks.3:45
Plus de vidéos de Pacific Yacht Systems
De Pacific Yacht Systems — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.