Should My Inverter/Charger Be Connected to a Busbar or Directly to the Battery?
5 décembre 2020 · 3 min · 14K vues
Ce que couvre cette vidéo
Inverter/chargers require connection to an unswitched positive distribution busbar rather than directly to the battery terminals to maintain a clean, organized electrical system. This busbar acts as a central point for charging circuits and unswitched loads, provided the inverter/charger remains properly fused and isolated. To ensure accurate battery monitoring, the system shunt must serve as the sole choke point for all negative current. Install the shunt between the battery bank and the negative distribution busbar. Any negative wire connected directly to the battery terminal bypasses the shunt, causing the battery monitor to ignore the inverter/charger's power consumption and charging output. All negative loads must route through the negative distribution busbar to ensure the monitor captures every amp entering or leaving the battery bank. Proper installation requires that no negative connections bypass the shunt, which must be the only path between the negative distribution busbar and the battery negative terminal.
Plus de vidéos de Pacific Yacht Systems
De Pacific Yacht Systems — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.