Living For Sail · vidéo

Ce que couvre cette vidéo

Restoration of a 1989 Liberty 458 involves structural repairs to the transom and bulwarks, primarily focused on moisture remediation and hardware mounting.0:09 To dry the water-saturated transom, a dehumidifier and space heaters proved insufficient, prompting the use of a vacuum pump to draw moisture from the fiberglass.0:59 Because the surface was too scratched for a vacuum bag seal, a thin layer of resin was applied to create an airtight surface.9:23

For the bulwark repairs, the owner plans to fill voids left by rotten plywood with a pour-in waterproof compound.12:51 To reattach 24 stanchion bases, he is designing custom 1-inch thick G10 backing plates.13:25 He uses 3D-printed cylinders to align existing, inconsistently drilled holes, scans the parts, and models the plates in FreeCAD for fabrication.18:58 Additionally, the project includes installing a Hydrovane self-steering system, for which he has received the H and A mounting brackets.2:12 The owner intends to use a 2-inch pipe as a dummy shaft to position these brackets on the rebuilt transom.2:43

Bateaux dans cette vidéo

Plus de vidéos de Living For Sail

BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boataoût 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!juil. 2026Uh oh... 2 Reasons why there is No New Video Today...mai 2026⛵️ Can a 3D Printed Bracket Actually HOLD UP?mai 2026

De Living For Sail — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.