Living For Sail · vídeo

O que este vídeo aborda

Restoration of a 1989 Liberty 458 involves structural repairs to the transom and bulwarks, primarily focused on moisture remediation and hardware mounting.0:09 To dry the water-saturated transom, a dehumidifier and space heaters proved insufficient, prompting the use of a vacuum pump to draw moisture from the fiberglass.0:59 Because the surface was too scratched for a vacuum bag seal, a thin layer of resin was applied to create an airtight surface.9:23

For the bulwark repairs, the owner plans to fill voids left by rotten plywood with a pour-in waterproof compound.12:51 To reattach 24 stanchion bases, he is designing custom 1-inch thick G10 backing plates.13:25 He uses 3D-printed cylinders to align existing, inconsistently drilled holes, scans the parts, and models the plates in FreeCAD for fabrication.18:58 Additionally, the project includes installing a Hydrovane self-steering system, for which he has received the H and A mounting brackets.2:12 The owner intends to use a 2-inch pipe as a dummy shaft to position these brackets on the rebuilt transom.2:43

Barcos neste vídeo

Mais de Living For Sail

Completing this repair BEFORE it’s TOO LATE!out. de 2026Can I Save This Bronze Cleat? Sailboat Bulwark Rebuildset. de 2026This Was Inside The Boat!? — Should I Put It Back?set. de 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boatago. de 2026

De Living For Sail — veja o barco, a tripulação e cada vídeo analisado do canal.

The Sailing Directory Newsletter

Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.