Practical Sailor · vidéo

Ce que couvre cette vidéo

Excess vibration traced to a worn rear port-side engine mount on a 27-year-old Perkins M20 diesel prompts a full four-mount replacement.3:00 Two diagnostic signs flag failing mounts before they break: black rubber dust around the mount base and the ability to twist the mount by hand with the engine stopped.2:09 A failed mount can misalign the prop shaft, stress the transmission, and cause structural damage including water infiltration; a broken mount can damage the engine itself.2:27

The replacement procedure covers measuring each mount's current height before removal — critical because mounts compress over years and heights often differ, as the front port mount on this engine sits higher to accommodate the alternator bracket.4:39 Mounts are swapped one at a time with the engine supported by wood blocks and a scissor jack held at light pressure.3:53 After installation, shaft alignment is checked and corrected using a spark plug feeler gauge between the transmission output flange and the prop shaft flange, adjusting in quarter- or half-turn increments equally port and starboard until the gap is uniform around the full rotation.5:29 New mounts from Parts for Engines (UK) were ordered with fresh hardware.3:17 A CNC 36 with a Yanmar 3QM on Lake Erie provides the opening context.Watch Alignment should be rechecked with a feeler gauge on a regular schedule tied to engine hours.4:59

Plus de vidéos de Practical Sailor

Beneteau 361 - Full Reviewsept. 2026Why Are Sailboats So Cheap?sept. 2026The MASSIVE Hunter Deck Saloon 41sept. 2026How To Go Cheap! The Annapolis Sailboat Showsept. 2026

De Practical Sailor — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.