BoatHowTo · vidéo

Ce que couvre cette vidéo

Jan Attenstedt and Nigel Calder discuss methods for managing shore power when traveling between regions with different voltages and frequencies. Converting shore power directly requires expensive equipment, such as frequency converters, which are typically found only on superyachts. Instead, Calder recommends using a marine battery charger as the sole connection point for shore power. In this configuration, the shore power circuit terminates at the charger, which feeds the battery bank. An inverter then draws power from the batteries to supply the boat's AC loads. This setup allows the system to handle varying shore power inputs without requiring voltage or frequency transformation. Because the shore power circuit is isolated at the battery charger, this method also eliminates the need for a separate galvanic isolator or isolation transformer, provided the charger is a marine-grade unit. This approach offers flexibility for global cruising at a lower cost than dedicated conversion hardware.

Plus de vidéos de BoatHowTo

MaxProp: More Pitch in Reverse than in Forward? 🤔 | Ask The Expert with NIGEL CALDERsept. 2026Common Ground Point with Isolated Saildrives | Ask The Expert with NIGEL CALDERsept. 2026How to keep you TANK CLEAN in the days of BIODIESEL.. | Ask The Expert with NIGEL CALDERaoût 2026PARALLELING Conductors for AMPACITY - is that SAFE?? | Ask The Expert with NIGEL CALDERaoût 2026

De BoatHowTo — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.