Alfredo Contaldovidéo
Propeller Shaft Bushing Replacement - 3-Blade Folding Propeller and Zincs 🛠 Onboard Work ⛵
16 mai 2026 · 9 min · 2K vues
Hands install folding propeller under sailboat at marina
Ce que couvre cette vidéo
Alfredo Contaldo replaces a worn propeller shaft bushing and upgrades from a fixed three-blade propeller to a folding three-blade model.Watch To remove the old propeller, he uses a mechanical puller and lubricant.0:55 When the shaft bushing shows several millimeters of play, he removes the locking set screws and drives the bushing out toward the propeller end using a rubber mallet and lubricant.2:13 He cuts the old bushing with an angle grinder to facilitate removal, taking care not to damage the shaft.2:04 The new bushing is inserted from the stern, lubricated with soapy water, and secured by drilling new pilot holes for the locking set screws.2:30 After installing the folding propeller with a torque wrench, he replaces the sacrificial zinc anodes on the shaft and the propeller hub.4:02 He notes that proper electrical contact is essential for the anodes to prevent galvanic corrosion on the shaft.5:18 Annual replacement of these anodes is mandatory to ensure the propeller and shaft remain protected.6:48
Plus de vidéos de Alfredo Contaldo
De Alfredo Contaldo — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.