Wind Hippie Sailingvidéo

Le régulateur d'allure a cassé et j'ai plongé pour le récupérer WHSE166

21 juillet 2025 · 26 min · 61K vues

Ce que couvre cette vidéo

Holly and Dan depart Darwin, Australia, aboard their 27-foot Grinde, *Gekko*, bound for Kupang, Indonesia. The 600-nautical-mile passage begins with a customs clearance at the Darwin dock, where officials require an immediate departure upon inspection. During the transit, heavy seaweed accumulation repeatedly forces the wind vane's trim tab upward, causing the mounting bolt to shear under load. In six-to-seven-foot following seas, Holly harnesses in and leans over the stern to replace the sheared bolt while Dan steers to keep the boat aligned with the waves. To prevent future failures, the crew reinforces the repair with additional lashings and plans to lock the trim tab in place during long ocean passages to prevent it from popping up. The vessel maintains speed using only a partially reefed headsail in 25-to-30-knot winds.

Regarder sur YouTube

Plus de vidéos de Wind Hippie Sailing

How to Set a Stern Anchor Solo WHS190sept. 2026The Red Bastard Strikes Again WHS189sept. 2026Holly vs Entropy WHSE188août 2026Here there be Whirlpools WHS187août 2026

De Wind Hippie Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.

Signaler un problème