Sampson Boat Co · vidéo

Ce que couvre cette vidéo

Leo Goolden applies two fiberglass wraps to the wooden mast of Tally Ho in Ensenada, Mexico, to protect against gaff-saddle chafe at reefed positions discovered after a heavy-wind overnight passage with Marat.9:54 He laminates three layers of 8 oz cloth using West Systems epoxy with a clear hardener, laying them up on a floating workbench upside-down on plastic sheeting, then hoists the bench aloft and applies the wet layup to the mast while hanging in a harness.11:42 Peel ply over the finished surface produces a consistent finish without sanding.20:09 He chose fiberglass over brass strips to avoid drilling additional holes in the mast center and to reduce the risk of water ingress.10:56 Higher on the mast, previously installed brass rubbing strips at the gaff saddle positions continue to handle the heavier chafe loads.11:35 Separately, a professional varnisher named Ricardo sands and re-coats the main companionway hatch and cockpit, while Leo plans to repaint the dinghy interior with paint rather than varnish for lower UV maintenance.8:54 Chafe protection at reefed gaff positions is a structural priority on a gaff-rigged vessel making extended downwind passages.

Plus de vidéos de Sampson Boat Co

Tally Ho completes her Atlantic Crossing at the Fastnet Rock!août 2026Change of plan - sailing into Ireland TODAY!juil. 2026Fog, Rum, and Fresh Tuna - Halfway across the Atlantic!juil. 2026Gale force winds / repairing sails at sea - Atlantic crossing, day 10juil. 2026

De Sampson Boat Co — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.