Salt & Tarvidéo
Salt & Tar: Ep.335- Not too Tight, Not too Loose
2 avril 2026 · 21 min · 48K vues
Ce que couvre cette vidéo
Garrett and Ruth are adding a custom pilot house to their George Buehler sailboat as part of an ongoing refit. To ensure the structure aligns with the existing cabin and deck, Garrett constructs rigid plywood guides screwed into the cabin top to hold the port and starboard walls in position.0:25 He uses epoxy to create structural welds at the seams where the walls meet the deck and cabin, a method that allows for a secure, permanent attachment once glassed.1:29 To determine the deck crown for the aft wall, Garrett uses a series of "pokey bits"—small tabs marked along the deck—to trace a curve with a batten.3:48 He creates a separate pine template based on the original building plans to transfer the deck crown onto the roof panels.10:19 The crew maneuvers the large plywood panels into place, aiming for a fit that is tight enough for structural integrity but loose enough to accommodate an epoxy seam.16:27
Plus de vidéos de Salt & Tar
De Salt & Tar — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.