Sailboat Magazine · vidéo

Ce que couvre cette vidéo

Refitting a Crealock 37 named Bella Sarah for relaunch requires extensive hull and mast preparation. The crew installs a new B&G depth, speed, and temperature transducer using a 10-degree shim to compensate for the hull's 30-degree deadrise.0:45 To improve visibility, they paint the masthead fluorescent green and apply DOT reflective tape.3:23 The mast is outfitted with a new B&G anemometer, a Lunacy tricolor light with a custom stanchion mount, and a Navico VHF-AIS antenna.7:20 Before the crane lift, the crew cleans mildewed lines in a laundromat, templates the standing rigging for future replacement, and applies two coats of bottom paint.8:20 Upon splashing, the engine fails to pump cooling water due to an airlock between the raw water intake and the sea strainer; bleeding the line restores flow.17:05 A minor leak at the stuffing box is corrected with a simple adjustment.16:46

Bateaux dans cette vidéo

Plus de vidéos de Sailboat Magazine

Pacific Loop Solo Sailor Bruce Maunsellmai 2026Full Keel Sailboat vs Fin Keel/Spade Rudder For Crossing Oceans 🤔oct. 2025They're In!!! Our New Solid Lifelines!sept. 2025🧐 You Tell Me! Solid Or Cable Lifelines!? Bulwarks Or Toerails?août 2025

De Sailboat Magazine — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.