Living For Sail · vidéo

Ce que couvre cette vidéo

Jon repairs the bow deck of his boat, Antidote, by vacuum bagging two layers of Kusa foam core to replace rotted plywood.0:09 He maintains a temperature above 60 degrees Fahrenheit to ensure proper epoxy curing, using a vacuum pump to hold 24 inches of mercury for 24 hours.0:26 To improve resin distribution during the second layer, he uses perforated peel ply and drills holes in the foam every six inches, though he notes that spacing the holes every two inches would have allowed better resin flow.11:30 A dial indicator confirms the structural integrity of the new deck, measuring only 0.050 inches of deflection under load.14:18 Jon also shapes a G10 block to reinforce the stem head fitting area, using thickened epoxy to fill gaps in the irregular cavity.15:50 He concludes that while the process requires tuning, the vacuum bagging technique successfully creates a stiff, solid deck.3:35

Bateaux dans cette vidéo

Plus de vidéos de Living For Sail

Completing this repair BEFORE it’s TOO LATE!oct. 2026Can I Save This Bronze Cleat? Sailboat Bulwark Rebuildsept. 2026This Was Inside The Boat!? — Should I Put It Back?sept. 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boataoût 2026

De Living For Sail — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.