Sailing Uma · vidéo

Ce que couvre cette vidéo

The crew of the 50-year-old sailboat Uma performs a major structural refit, focusing on the installation of the final large bulkhead to define the new head and shower layout.2:05 To ensure the bulkhead remains straight during installation, the crew uses temporary wood bracing and a laser level to correct a slight bow in the panel before bonding it to the hull.10:33 They apply fiberglass layers to both sides of the bulkhead, sandwiching it with wood supports to maintain alignment while the resin cures.3:28 During the process, the crew tests an electric rotary cutter—referred to as a "pizza cutter"—to slice through multiple layers of biaxial fiberglass fabric, finding it significantly more efficient and less physically taxing than manual metal shears.15:28 The installation involves a multi-step process of wetting out fiberglass fabric on a plastic-lined surface in the galley before passing the material to the installation area for bonding.19:54 The crew plans to finish the remaining perimeter glassing after the initial structural bonds cure and the bracing is removed.19:42

Plus de vidéos de Sailing Uma

We Ditched Our Steering Wheel (And Built Something Better) | Step 496sept. 2026We're Finally Setting Sail Again!sept. 20264 Hours to Rig Solar for an 8-Month Solo Circumnavigationsept. 2026Solar Sponsor Backed Out Before Sailing Around the World !sept. 2026

De Sailing Uma — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.