Project Brupeg · vidéo

Ce que couvre cette vidéo

Damien and the crew of the former fishing trawler *Brupeg* cut a 1.4-meter by 0.75-meter hole in the deck to install a new generator in the engine room.5:24 To prepare the space, they relocated a heavy "get home" motor using chain blocks and custom-fabricated lifting hooks made with a plasma cutter.6:18 They used a Unimig plasma cutter to slice through the 6mm steel deck, employing a plywood straight edge secured by heavy starter motors as a guide.14:55 To minimize debris in the engine room, they placed a water-filled bucket beneath the cut to catch sparks and molten metal.13:49 During the process, the deck sagged after a structural member was removed, requiring the crew to weld a lifting point to the panel to pry it free.17:14 The team plans to lower the generator to fabricate custom mounts before removing it again for final painting and installation.25:54 A donated welding rotator will assist with subsequent exhaust and water pipe fabrication.10:44

Plus de vidéos de Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463oct. 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462sept. 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461sept. 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460sept. 2026

De Project Brupeg — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.