The Mariner · vidéo

Ce que couvre cette vidéo

Chris, the host of The Mariner, repairs a hydraulically locked engine on his boat while offshore during a long-distance passage to Nova Scotia. After riding out a 40-knot storm, water from the exhaust water lock backed up into the exhaust manifold and entered the cylinders, preventing the engine from starting.▶ 3:00 To clear the system, he drains the water lock, removes the fuel injectors, and uses the starter motor to blow remaining water out of the cylinders.▶ 2:01 He initially misidentified the injector seating as copper crush washers but confirms that his TAMD engine uses copper sleeves with shaped heads, requiring no additional washers.▶ 15:02 He uses clear tubing on the fuel return lines to prevent diesel from spilling into the bilge while cranking the engine.▶ 4:29 After verifying the engine turns over freely without water or mechanical obstruction, he prepares to reinstall the injectors and restart the engine.▶ 20:12 Proper preparation and avoiding haste during the final reassembly stages are critical to successfully restoring engine operation.

Plus de vidéos de The Mariner

Taking a Look Around the Waterfront in Lunenburg, Nova Scotiajuin 2026Solo Docking an 80ft Yacht Without Use Of The Auxillary Enginemai 2026The Flat Earth Debate Debunked in 10 Minutes by a Real Offshore Navigatormai 2026Ghosting Through The Fogmai 2026

De The Mariner — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.