Wind Hippie Sailing · vidéo

Ce que couvre cette vidéo

To address a knocking sound in the transom-hung rudder of the 30-ft sailboat Gekko, the owner hauls the vessel at Rosshaven in Townsville, Australia, to replace worn bushings.0:32 Because the rudder’s bottom mounting plate features captive nuts that spin freely, the repair requires cutting access holes into the fiberglass skeg to reach and remove the hardware.9:37 After removing the rudder, the crew cleans the assembly, replaces the corroded bottom plate, and installs shaft repair sleeves to compensate for slightly oversized replacement bushings.17:16 To seal the access holes in the skeg, the crew inserts custom-cut PVC foam board plugs, coats them with epoxy mixed with colloidal silica, and finishes the surface with additional resin.21:20 The project also involves removing the wind vane and solar panel to clear the workspace, followed by applying three coats of antifouling paint to the rudder and skeg.4:34 Using high-quality 316 stainless steel hardware and nylock nuts ensures a secure, long-term connection for the rudder assembly.18:05

Bateaux dans cette vidéo

Plus de vidéos de Wind Hippie Sailing

The Red Bastard Strikes Again WHS189sept. 2026Holly vs Entropy WHSE188août 2026Here there be Whirlpools WHS187août 2026In and Out and In Again WHS186août 2026

De Wind Hippie Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.