Wind Hippie Sailing · vidéo

Ce que couvre cette vidéo

To address a knocking sound in the transom-hung rudder of the 30-ft sailboat Gekko, the owner hauls the vessel at Rosshaven in Townsville, Australia, to replace worn bushings.0:32 Because the rudder’s bottom mounting plate features captive nuts that spin freely, the repair requires cutting access holes into the fiberglass skeg to reach and remove the hardware.9:37 After removing the rudder, the crew cleans the assembly, replaces the corroded bottom plate, and installs shaft repair sleeves to compensate for slightly oversized replacement bushings.17:16 To seal the access holes in the skeg, the crew inserts custom-cut PVC foam board plugs, coats them with epoxy mixed with colloidal silica, and finishes the surface with additional resin.21:20 The project also involves removing the wind vane and solar panel to clear the workspace, followed by applying three coats of antifouling paint to the rudder and skeg.4:34 Using high-quality 316 stainless steel hardware and nylock nuts ensures a secure, long-term connection for the rudder assembly.18:05

Bateaux dans cette vidéo

Plus de vidéos de Wind Hippie Sailing

Panama Canal Revisited oct. 2026How to Set a Stern Anchor Solo WHS190sept. 2026The Red Bastard Strikes Again WHS189sept. 2026Holly vs Entropy WHSE188août 2026

De Wind Hippie Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.