Wildling Sailing · vidéo

Ce que couvre cette vidéo

A DIY steering system for a Wharram catamaran involves fabricating a custom stainless steel shaft and aluminum drum assembly.4:19 The project replaces the original plywood steering wheel design with a stainless steel wheel mounted on an enlarged wooden block.3:43 To reduce friction, the assembly uses oil-lite bushings bored to one inch to accommodate the custom shaft.4:26 The fabrication process requires drilling and tapping 8mm threads into the aluminum drum, which is then secured to the tapered shaft using a set screw that seats into a machined divot.20:45 The builder also fabricates stainless steel backing plates for the cap shroud chain plates to repair rot damage caused by exposed bulkhead holes.2:45 Previous structural repairs on the vessel included sealing through-hulls, repairing window apertures, and reinforcing mast support beams.1:31 The builder plans to complete the steering system installation upon returning to the boat in four weeks, with the goal of making the vessel sailable by the end of the summer.23:32

Plus de vidéos de Wildling Sailing

One Step Back, One Step Sideways & One Step Forward | My Budget Catamaran Refitoct. 2026I Lifted Her Out For a Very Important Rebuild.sept. 2026One Final Refit Before Crossing The Atlantic.août 20262 Days Alone at Sea On my Primitive Double-Canoe.août 2026

De Wildling Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.