Sailing Uma · vidéo

Ce que couvre cette vidéo

The crew of a 50-year-old sailboat replaces the vessel's original, corroded stainless steel chain plates with custom-fabricated 12mm stainless steel replacements.▶ 2:08 The original plates suffered from elongated pinholes and structural deformation after decades of use.▶ 1:47 The new hardware is 2mm thicker than the originals and utilizes 12mm bolts instead of the previous 8mm size.▶ 2:04 To ensure a precise fit against the hull's fiberglass-reinforced bulkheads, the crew uses a bedding technique: they tape and wax the chain plates, then backfill the gaps with epoxy to create a perfectly flush mounting surface.▶ 18:30 They also weld deck plates to the chain plates to create a sealed, leak-proof joint, replacing the previous aluminum-and-wood-screw configuration that caused core rot.▶ 33:19 By staggering the bulkheads and reinforcing the attachment points with additional fiberglass layers, the crew increases the structural integrity of the rig's base.▶ 16:19 These upgrades allow for proper rig tuning and prevent the mast from sagging during upwind sailing in heavy weather.▶ 17:38

Plus de vidéos de Sailing Uma

Uma is Ready to Launch! (But there's a catch) | Step 489juin 2026How Many Sails Does it Take To Replace a Diesel Engine? | Step 488mai 2026Turning Our Powerboat Back Into a Sailboat | Step 487mai 2026We Cut our Mast in Half | Step 486mai 2026

De Sailing Uma — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.