keeldraggervidéo
Diagnosis, Troubleshooting, and a mini shakedown in San Diego - Dana 24 - (Dec 2018)
24 décembre 2018 · 14 min · 1K vues · San Diego Bay
Ce que couvre cette vidéo
Mark troubleshoots a suspected engine overheating issue on a Dana 24 in San Diego, California. After inspecting the cooling system, he discovers the coolant reservoir is plumbed directly into the freshwater cooling system rather than acting as a standard overflow tank.4:03 He tops off the coolant and engine oil, then uses a GoPro attached to a boat pole to inspect the propeller.4:00 He finds stringy kelp wrapped between the cutlass bearing and the prop, which likely restricted water flow.7:19 He also notes the propeller zinc is missing, suggesting potential stray current damage.9:08 To address potential scale buildup in the heat exchanger, he runs Barnacle Buster through the raw water strainer, allowing the solution to soak for two hours before flushing the system.12:12 A test run at 2200 RPM confirms the engine temperature remains stable at 172 degrees Fahrenheit.11:21 Replacing the raw water pump and heat exchanger pressure cap are planned as future maintenance steps.1:34 Clearing debris from the propeller and descaling the heat exchanger can resolve engine overheating caused by restricted water flow.
Bateaux dans cette vidéo
Plus de vidéos de keeldragger
De keeldragger — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.



