How to Wire USB and 12V Outlets - Branch Circuits | Ep: 1/10
16 mars 2025 · 6 min · 56K vues
Ce que couvre cette vidéo
Nate, host of the EXPLORIST life Mobile Marine & Off-Grid Electrical Academy, demonstrates how to wire USB and 12V outlets as branch circuits in a 12-volt DC system.0:07 The demo uses a Blue Sea Blade Fuse Block as the distribution point, with the Victron Lynx distributor mentioned as the upstream power source from the battery.0:32 Nate pulls the fuse before working, then re-inserts it to test — and flags mid-demo that he briefly worked on a live circuit before correcting himself.1:13
The core technique uses lever nuts to connect positive and negative wires from the fuse block to outlet locations.1:18 Each outlet receives a short pigtail with a stripped end on one side and a spade connector on the other, which pushes onto the labeled positive and negative terminals on the outlet's back.2:10 Lever nuts are presented as optional — direct crimped spade connectors work equally well — but preferred for flexibility when adding future outlets.4:00 A second outlet at a greater distance uses longer wire runs feeding into a second lever nut, then spade connectors to the outlet.4:28 Wire sizing for 12V outlets versus USB outlets depends on load calculations covered separately; this lesson covers only the physical connections.6:13
Plus de vidéos de EXPLORIST life Mobile Marine & Off-Grid Electrical
De EXPLORIST life Mobile Marine & Off-Grid Electrical — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.