Sailing Uma · vidéo

Ce que couvre cette vidéo

The crew of the Pearson 36 *Uma* successfully removed the vessel's keel to address long-standing grounding damage and structural delamination at the keel joint. After drilling through the keel to access the original 12 bronze J-bolts, the team used a custom-built drill bit to clear resin and debris, eventually separating the keel from the hull. They replaced the original hardware with eight one-inch stainless steel bolts, installing them with JB Weld to ensure 100% thread engagement and structural redundancy. To reinforce the keel stub, the crew applied seven layers of fiberglass and approximately 20 kilograms of resin, utilizing a vacuum bagging technique to remove air bubbles and ensure a uniform, high-strength laminate. The repair process involved tapering the glass layers into the hull to create a continuous, reinforced structure. The project concludes with the keel stub significantly stronger than the original factory specification.

Bateaux dans cette vidéo

Plus de vidéos de Sailing Uma

We Owe You The Full Storyjuil. 2026We Covered Our Boat in Solar. Is It Enough? | Step 492 (Part 3)juil. 2026Uma is Ready to Launch! (But there's a catch) | Step 489juin 2026How Many Sails Does it Take To Replace a Diesel Engine? | Step 488mai 2026

De Sailing Uma — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.