Sailing NVvidéo
If This Fails, We Sink | Installing the Engine Bed with Carbon Fibre | S2 Ep 69
7 septembre 2025 · 23 min · 6K vues
Ce que couvre cette vidéo
Timo, of the vessel NV, installs a new engine bed to accommodate a larger engine and sail drive. To ensure proper alignment, he centers the bed relative to the keel and rudder by using a string line marked with masking tape.3:21 He calculates the necessary clearance by comparing the old and new sail drive dimensions, ultimately grinding the hull and shaping the bed to increase the distance between the propeller blades and the hull from 20mm to 30mm.11:23 The installation requires precise cutting to fit the bed around existing bulkheads without compromising structural integrity.0:22 Timo reinforces the mounting area with multiple layers of 300-gram carbon fiber, totaling 1800 grams in critical sections, and uses peel ply to ensure a smooth, saturated finish.17:51 He corrects a dry spot in the layup by adding more epoxy before the final cure.19:40 The new foundation provides the necessary support for the heavier engine and ensures the sail drive remains centered.
Plus de vidéos de Sailing NV
De Sailing NV — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.