Sailing Uma · vidéo

Ce que couvre cette vidéo

A comparative structural test of marine plywood versus foam-core composite panels reveals that 20mm marine plywood offers higher load-bearing strength than equivalent foam-core laminates at a significantly lower cost. Using a custom-built test rig and a digital crane scale, the crew of the 9,000-kilogram vessel Uma measured the force required to deflect and break various samples, including 12mm and 20mm marine plywood, and foam panels laminated with varying weights of glass fiber and resin. Results showed that 20mm marine plywood failed at 66.8 kilograms of force, while foam-core samples with 1,200 grams of glass per side failed at lower thresholds. The testing also indicated that vinyl ester resin produced stiffer, lighter, and stronger laminates than West System epoxy in these specific configurations. Financial analysis determined that building the boat’s bulkheads from foam and vinyl ester would cost over three times more than plywood, while epoxy construction would cost nearly eight times more, with minimal weight savings relative to the total displacement of the boat.

Plus de vidéos de Sailing Uma

Our boat won’t look the same after this | Step 495août 2026The ONE Thing We Disagreed on This Entire Refit | Step 494août 2026We Owe You The Full Storyjuil. 2026We spent $10,000 on something Pretty | Step 493juil. 2026

De Sailing Uma — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.