Sailing SV Delos · vidéo

Ce que couvre cette vidéo

The crew at Stradbrook Yachts tests the hull integrity of their new aluminum catamaran, Delos 2.0, by intentionally flooding internal compartments with water.0:02 To verify the quality of the hull weld seams and internal bulkheads, they fill the fuel tanks, water tanks, and forward sections with approximately five tons of water.10:46 The team opts for this hydrostatic pressure test over costly non-destructive methods like X-rays or ultrasonic testing, which they deem impractical for the entire vessel.12:25 After allowing the water to sit for four hours, they perform a visual inspection of all seams and penetrations, confirming no leaks.19:34 The build process also includes installing six bilge pumps, transitioning from fillet welds to butt welds at the keel to prevent debris accumulation, and fitting custom rubber seals and weldable hinges to the engine room hatches.9:04 The successful water test confirms the structural sealing of the hull compartments.20:04

Plus de vidéos de Sailing SV Delos

Fit or FAIL 🫣 Building Our Own Aluminum Catamaran Pt. 85sept. 2026This Is Where It Gets INTERESTING…Aluminum Catamaran Build Pt. 84août 2026EVERY INCH COUNTS....Aluminum Catamaran Build Pt. 83août 2026FIRST TEST: The Last Dinghy We'll Ever Buy??? Aluminum Catamaran Build Pt. 82août 2026

De Sailing SV Delos — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.