Sailing Triteia · video

Cosa tratta questo video

Removal of a failed mast step on a Panda 40 requires cutting out the original fiberglass-encapsulated wood, which had suffered significant compression and deformation.0:35 The mast shoe had created a 1/8-inch depression in the step, likely caused by water intrusion through the lag bolt holes that rotted the underlying wood.2:50 After removing the old step with a Sawzall, the crew inspected the underlying cross beam and found it structurally sound and dry, eliminating the need for deeper repairs near the keel.8:04 The replacement step consists of 2 1/4-inch thick marine plywood, reinforced with side braces and fully encapsulated in West System epoxy.10:00 To ensure a strong bond for the new tabbing, the crew sanded the surrounding bilge paint down to the hull laminate.9:38 The new assembly was dry-fitted to the cross beam before final epoxy coating and glassing.11:03 Over-drilling and epoxy-filling the new lag bolt locations will prevent future water ingress.6:06

Barche in questo video

Altro da Sailing Triteia

Victoria Arrives to Victoria, Mahe, Seychelles and We Sail to Silhouette Islandago 2026Forney Cove on Santa Cruz Island From The Channel Islands Cruising Guideago 2026Dangerous Sailing in Coral Passes & Storms in the Maldives on a 30ft Sailboatago 2026Pushing Through The Maldives - Cruising in Paradise At the Wrong Time of Yearago 2026

Da Sailing Triteia — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.