Sailing Triteia · vidéo

Ce que couvre cette vidéo

Removal of a failed mast step on a Panda 40 requires cutting out the original fiberglass-encapsulated wood, which had suffered significant compression and deformation.0:35 The mast shoe had created a 1/8-inch depression in the step, likely caused by water intrusion through the lag bolt holes that rotted the underlying wood.2:50 After removing the old step with a Sawzall, the crew inspected the underlying cross beam and found it structurally sound and dry, eliminating the need for deeper repairs near the keel.8:04 The replacement step consists of 2 1/4-inch thick marine plywood, reinforced with side braces and fully encapsulated in West System epoxy.10:00 To ensure a strong bond for the new tabbing, the crew sanded the surrounding bilge paint down to the hull laminate.9:38 The new assembly was dry-fitted to the cross beam before final epoxy coating and glassing.11:03 Over-drilling and epoxy-filling the new lag bolt locations will prevent future water ingress.6:06

Bateaux dans cette vidéo

Plus de vidéos de Sailing Triteia

HELLO MADAGASCAR!!! A Dream Come True!!! Sailing To Nosy Be & Getting Cleared In to theoct. 2026A Visit to the French Island of Mayotte, A Hike With Friends & Gear Failure Stopping My Departureoct. 2026Exploring LA DIGUE Island, Sailing Back to Mahe and Saying Goodbye to Victoriasept. 2026Seeing the World Famous Giant Tortoises of the Seychelles!sept. 2026

De Sailing Triteia — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.