Pacific Yacht Systems · video

Cosa tratta questo video

Fabricating heavy-duty battery jumpers requires precise cable preparation, proper crimping techniques, and correct hardware stacking to ensure electrical conductivity. When working with 2-0 gauge cable, measure the required length to allow for gentle, even bends rather than tight angles.1:37 Strip the insulation carefully to avoid cutting wire strands, then twist the cable strands to match their natural lay before inserting them fully into the lug.3:52 Use a battery crimper with the appropriate die set—such as E and A for 2-0 cable—and perform two separate crimps to ensure full compression.5:43 Apply heat shrink tubing over the connection, ensuring it does not cover the flat contact surface of the lug.8:36 When installing the finished cable, stack hardware so that stainless steel components, which are poor conductors, remain on the outside of the connection.12:16 Pre-preparing cables outside of confined spaces like lazarettes or bilges improves accuracy and leverage.6:47 Always verify that all terminal connections are tightened before applying power to the system.11:56

Altro da Pacific Yacht Systems

There Is NO MORE ROOM For Additional Batteries, What Do You Do? PYS Tech Talkset 2026DIY vs Professional Boat Electronics, What to Look for When Buying Used - PYS Tech Talkago 2026When Battery Charging Through An Inverter Might Make Sense - PYS Tech Talkago 2026Upgrading Your Alternator? These Are OUR Top Tips - PYS Tech Talkago 2026

Da Pacific Yacht Systems — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.