Tips from a Shipwright · video

Cosa tratta questo video

To prepare a wooden boat hull for framing, the shipwright trims excess cedar planking from the chine logs using a reciprocating saw with the blade teeth ground down at the tip to prevent damage to the log.0:45 After removing temporary screws used to stabilize the side planks against the stem, the shipwright uses a handsaw to cut the planking flush to the rabbet line.2:06 A block plane finishes the cedar surface to ensure it sits flush with the outboard side of the chine.3:51 The frames, constructed from yellow bark oak at 1 1/8-inch thickness and 2 1/2-inch width, are clamped into position with a 1/2-inch gap between the frame end and the chine log.4:37 To fair the transom corner, an electric plane with a zip-tie trigger lock removes material down to a pre-marked control line.8:02 The hull design features a flat bottom that transitions to a 4-inch rise approximately 5 feet aft of the stem.9:46

Altro da Tips from a Shipwright

Building Orca - Ep. 23: Mold FIVEmar 2026Progressive Bevelingfeb 20261958 Harley Davidson Panhead Motorcycle - For Salefeb 2026Building Orca - Ep. 22: Lofting Pt. 3 - Full Scale Linesgen 2026

Da Tips from a Shipwright — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.