The Mariner · video

Cosa tratta questo video

Refitting a Volvo 80, formerly an Ericsson 80, in Cherbourg requires addressing several critical maintenance tasks before a solo transatlantic crossing. The mast currently lacks proper tension, causing the rig to pump and bend; the owner plans to use a hydraulic power pack to tune the Marconi rig and brace the panels between spreaders.▶ 0:58 A custom section of the mast gate track was lost overboard, necessitating a new part machined from a template taken from the original headboard car.▶ 3:58 Bilge maintenance revealed an oil leak traced to a loose gearbox drain bolt on the HSV1 gearbox, which shares oil with the main engine.▶ 5:19 The owner also installed an inspection hatch on a grey water tank and organized electrical connections using Wago connectors inside a waterproof box.▶ 7:29 Dyneema lashings are being replaced, and incorrectly installed shackles on the back deck are being reversed to align with the flat-sided fittings.▶ 2:24 Proper rig tensioning and track replacement remain the final priorities before departure.

Altro da The Mariner

Taking a Look Around the Waterfront in Lunenburg, Nova Scotiagiu 2026Solo Docking an 80ft Yacht Without Use Of The Auxillary Enginemag 2026The Flat Earth Debate Debunked in 10 Minutes by a Real Offshore Navigatormag 2026Ghosting Through The Fogmag 2026

Da The Mariner — guarda la barca, l'equipaggio e ogni video analizzato del canale.