The Mariner · vídeo

O que este vídeo aborda

Refitting a Volvo 80, formerly an Ericsson 80, in Cherbourg requires addressing several critical maintenance tasks before a solo transatlantic crossing. The mast currently lacks proper tension, causing the rig to pump and bend; the owner plans to use a hydraulic power pack to tune the Marconi rig and brace the panels between spreaders.▶ 0:58 A custom section of the mast gate track was lost overboard, necessitating a new part machined from a template taken from the original headboard car.▶ 3:58 Bilge maintenance revealed an oil leak traced to a loose gearbox drain bolt on the HSV1 gearbox, which shares oil with the main engine.▶ 5:19 The owner also installed an inspection hatch on a grey water tank and organized electrical connections using Wago connectors inside a waterproof box.▶ 7:29 Dyneema lashings are being replaced, and incorrectly installed shackles on the back deck are being reversed to align with the flat-sided fittings.▶ 2:24 Proper rig tensioning and track replacement remain the final priorities before departure.

Mais de The Mariner

Taking a Look Around the Waterfront in Lunenburg, Nova Scotiajun. de 2026Solo Docking an 80ft Yacht Without Use Of The Auxillary Enginemai. de 2026The Flat Earth Debate Debunked in 10 Minutes by a Real Offshore Navigatormai. de 2026Ghosting Through The Fogmai. de 2026

De The Mariner — veja o barco, a tripulação e cada vídeo analisado do canal.