Classic Yacht TV · video

Cosa tratta questo video

A boatbuilder named Ben constructs the full-size plywood-and-timber foundry pattern for the cast iron ballast keel of a new schooner, Malabar IV, built to John Alden's original plans.2:34 The pattern must be made slightly oversize — approximately one-eighth inch per foot in each dimension — to compensate for iron shrinkage in the sand mold.2:50 Ben cuts the two plywood side panels, marks station lines, then fits long right-angle off-cuts from previous mast-making as corner battens along the inside edges to anchor the top and bottom panels.2:58 Internal plywood spreaders, cut to the correct width and angle, will hold the mold's belly shape, which narrows at each end and widens in the middle.6:40 The central design question is whether to follow Alden's specification and have a foundry cast an iron keel, or to home-cast a lead keel instead — a decision still unresolved at the time of filming.5:43 Ben has previously home-cast lead ballast himself but notes iron requires a commercial foundry.2:15 Patterns for the stem, sternpost, and timber keel are already complete and stacked ready for use.1:35

Altro da Classic Yacht TV

EP13 Fastnet update | Interior layout: Building the schooner MALABAR IVmag 2026EP12 fitting planks: Building the schooner Malabar IVfeb 2026EP11 shaping planks: : Building the schooner Malabar IVgen 2026EP10 Steaming and fitting Green Oak frames: Building the schooner Malabar IVgen 2026

Da Classic Yacht TV — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.