Classic Yacht TV · video

Cosa tratta questo video

A boatbuilder demonstrates the full process of laying out and shaping a hull plank for the schooner Malabar IV, a traditional wooden vessel under construction. Using a spiling batten marked at every station frame — spaced three feet apart — the builder transfers frame positions and plank widths from a table of offsets onto raw planking stock.3:31 At each station, a bevel gauge records the changing angle between frame and plank; a bevel stick cut to the same thickness as the plank stock translates that angle into a precise wood addition, the extra material that will be removed when the bevel is cut so the finished plank lands at the correct width.7:06 The builder marks each station, adds the bevel offset, then springs a batten through all points to generate a fair curve for the saw cut.4:17 A brief exchange addresses a discrepancy at station 10 where a neighboring plank had been hogged out; the solution is to tick-stick off the tuck rather than thin the new plank further, keeping the seam even.10:25 Accurate bevel offsets added before cutting are essential to avoid ending up underwidth after fairing.7:45

Altro da Classic Yacht TV

EP13 Fastnet update | Interior layout: Building the schooner MALABAR IVmag 2026EP12 fitting planks: Building the schooner Malabar IVfeb 2026EP10 Steaming and fitting Green Oak frames: Building the schooner Malabar IVgen 2026EP09 Positioning laminated floors and frames, summer recap #3: Building the schooner Malabar IVdic 2025

Da Classic Yacht TV — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.