Sampson Boat Co · video

Cosa tratta questo video

Tally Ho, a gaff-rigged wooden vessel, completes an 800-mile offshore passage from British Columbia and anchors at Drake's Bay before transiting under the Golden Gate Bridge into San Francisco Bay.▶ 0:07 The immediate purpose of the stop is repairing chafe damage to the spruce mast caused by the leather gaff saddle — a known problem in gaff rigs where rigging geometry drives the saddle against the mast regardless of lubrication.▶ 5:23 Leo Goolden and crew moor at Spaulding Marine Centre in Sausalito, a non-profit boatyard with a 1930s stiff-leg derrick rated at 14 tons, where they machine brass half-oval strips to length and countersink them for fasteners.▶ 4:18 To prevent water intrusion, they drill G10 fiberglass rod plugs into the mast, glue them in place, then tap machine-screw threads into the plugs before fastening the brass strips — avoiding direct wood-screw penetration that could allow rot.▶ 10:06 Chafe protection is installed only at the full-hoist and first-reef gaff positions; lower reef positions showed no chafing with lubrication alone.▶ 12:53 The boat later moves to Richmond Yacht Club on the east side of the bay while work continues.▶ 9:29 Tapping holes aloft in 40-knot wind introduces alignment errors, but the repair is completed before departure south toward Southern California.▶ 11:32 Fiberglass rod plugs tapped for machine screws offer a more rot-resistant fastening method than direct wood screws for hardware on a varnished wooden mast.▶ 9:53

Altro da Sampson Boat Co

crossing the North Atlantic on my wooden boat day 6lug 2026Tally Ho in Florida! ...preparing for our longest voyage.lug 2026An update from the ocean - Cuba to the Bahamasgiu 2026Sailing into Cuba with half a ton of humanitarian suppliesgiu 2026

Da Sampson Boat Co — guarda la barca, l'equipaggio e ogni video analizzato del canale.