Sampson Boat Co · vidéo

Ce que couvre cette vidéo

Tally Ho, a gaff-rigged wooden vessel, completes an 800-mile offshore passage from British Columbia and anchors at Drake's Bay before transiting under the Golden Gate Bridge into San Francisco Bay.▶ 0:07 The immediate purpose of the stop is repairing chafe damage to the spruce mast caused by the leather gaff saddle — a known problem in gaff rigs where rigging geometry drives the saddle against the mast regardless of lubrication.▶ 5:23 Leo Goolden and crew moor at Spaulding Marine Centre in Sausalito, a non-profit boatyard with a 1930s stiff-leg derrick rated at 14 tons, where they machine brass half-oval strips to length and countersink them for fasteners.▶ 4:18 To prevent water intrusion, they drill G10 fiberglass rod plugs into the mast, glue them in place, then tap machine-screw threads into the plugs before fastening the brass strips — avoiding direct wood-screw penetration that could allow rot.▶ 10:06 Chafe protection is installed only at the full-hoist and first-reef gaff positions; lower reef positions showed no chafing with lubrication alone.▶ 12:53 The boat later moves to Richmond Yacht Club on the east side of the bay while work continues.▶ 9:29 Tapping holes aloft in 40-knot wind introduces alignment errors, but the repair is completed before departure south toward Southern California.▶ 11:32 Fiberglass rod plugs tapped for machine screws offer a more rot-resistant fastening method than direct wood screws for hardware on a varnished wooden mast.▶ 9:53

Plus de vidéos de Sampson Boat Co

crossing the North Atlantic on my wooden boat day 6juil. 2026Tally Ho in Florida! ...preparing for our longest voyage.juil. 2026An update from the ocean - Cuba to the Bahamasjuin 2026Sailing into Cuba with half a ton of humanitarian suppliesjuin 2026

De Sampson Boat Co — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.