Catamaran Mistertong · video

Hva denne videoen dekker

The owners of a wooden catamaran are rebuilding the vessel's stern skirts to prevent water intrusion and structural rot. After completing the starboard skirt, the crew begins work on the port side, using 15mm plywood reinforced with five layers of 450g fiberglass and epoxy resin.1:49 The project involves cutting away damaged sections of the original structure, installing new internal bulkheads and support cleats, and sealing the wood to ensure a watertight finish. The owners note that the original skirts suffered from delamination and wood decay due to repeated impacts from the dinghy and water exposure.2:42 By re-engineering the skirts with thicker fiberglass laminates, they aim to increase impact resistance and eliminate potential water traps.2:50 The team optimizes their workflow by dry-fitting all components before bonding, which allows them to complete the assembly in a single phase.23:03 They confirm that these modifications to the above-waterline structure do not compromise the vessel's integrity or sailing performance.38:08

Mer fra Catamaran Mistertong

#255 Between portholes and delicacies ...sep. 2026#254 Sailing trip, reunion, back to work and beauty ....sep. 2026Miss Tong's Kitchen: Coffee ice cream and speculoos ice creamsep. 2026#253 Sometimes despair takes over…sep. 2026

Fra Catamaran Mistertong – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.