Sailing With Phoenix | Oliver · video

Hva denne videoen dekker

Repairing a deck hole for a windlass installation on With Phoenix | Oliver requires a multi-day fiberglass and epoxy process, complicated by high winds and heavy rain.0:02 Over approximately 12 days, the owner patches a hole in the deck by fiberglassing the underside, filling the top side with TotalBoat fairing compound, and sanding the surface flat.18:11 The repair involves creating a template to guide the fiberglass cuts and drilling pilot holes to ensure the windlass fits correctly.13:15 Throughout the project, the owner maintains a heated, tented workspace to manage moisture and curing times despite 40- to 50-mph wind gusts.0:27 After applying a barrier coat, the final step involves applying gel coat to the repaired area before mounting the windlass.25:10 The project is time-sensitive, as the owner must complete the installation before a rescheduled haul-out date.26:12

Mer fra Sailing With Phoenix | Oliver

38 days until I sail around the world without stopping aug. 2026First Sail Alone Since Sailing To Hawai'iaug. 202664 Days Until I Sail Nonstop Around The Worldjuli 2026I've been doing a bad job...mai 2026

Fra Sailing With Phoenix | Oliver – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.