Project Brupeg · video

Hva denne videoen dekker

Installation of a DIY watermaker on the 10-year refit project vessel *BrewPeg* involves fabricating stainless steel and aluminum mounting brackets for the membrane, gauges, and DC pump within the engine room.1:20 The system utilizes a DC pump to draw water from a dedicated seacock through a strainer and filter assembly before feeding the membrane.2:21 The crew mounts the membrane housing using rubber-lined stainless straps and T-clamps, positioning the pressure gauges and needle valve for centralized control.2:39 Plumbing the system requires custom routing with 90-degree fittings and reducers to accommodate tight clearances, particularly for the high-pressure line exiting the membrane.7:53 The installation process involves lubricating O-rings with food-grade grease and securing the membrane with half-moon locking caps.6:01 Progress stalls due to a lack of specific plumbing fittings, forcing the crew to cannibalize parts from a separate fuel transfer system project.14:48 The high-pressure hose from the pump also presents a clearance issue, as the existing bend radius exceeds the available space between the mounted unit and the bulkhead.16:07

Mer fra Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463okt. 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462sep. 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461sep. 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460sep. 2026

Fra Project Brupeg – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.