Sailing Uma · video

Hva denne videoen dekker

To seal the V-berth hatch on the sailboat Uma, the crew uses a plywood template and fiberglass to patch the cabin top.1:14 After struggling with wind and heat during previous attempts, the team secures a 4mm plywood backing from underneath using screws to ensure a tight fit against the hull’s compound curves.7:55 They apply multiple layers of chop strand mat and resin from the outside to fill the gap, using plastic sheeting to create a smooth finish.4:20 The crew notes that the resin remains tacky under the plastic until fully cured, but the resulting contour matches the deck profile, requiring only minor fairing.3:36 By sealing the V-berth hatch, the deck is now fully watertight.19:13 Future work includes adding balsa core to the cabin sides and glassing the underside of the deck to increase structural stiffness.17:39 The crew plans to delay cutting new holes for hatches until they have the replacement units on hand.18:57

Mer fra Sailing Uma

We're Finally Setting Sail Again!sep. 20264 Hours to Rig Solar for an 8-Month Solo Circumnavigationsep. 2026Solar Sponsor Backed Out Before Sailing Around the World !sep. 2026Our boat won’t look the same after this | Step 495aug. 2026

Fra Sailing Uma – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.