Sailing Uma · vídeo

O que este vídeo aborda

To seal the V-berth hatch on the sailboat Uma, the crew uses a plywood template and fiberglass to patch the cabin top.1:14 After struggling with wind and heat during previous attempts, the team secures a 4mm plywood backing from underneath using screws to ensure a tight fit against the hull’s compound curves.7:55 They apply multiple layers of chop strand mat and resin from the outside to fill the gap, using plastic sheeting to create a smooth finish.4:20 The crew notes that the resin remains tacky under the plastic until fully cured, but the resulting contour matches the deck profile, requiring only minor fairing.3:36 By sealing the V-berth hatch, the deck is now fully watertight.19:13 Future work includes adding balsa core to the cabin sides and glassing the underside of the deck to increase structural stiffness.17:39 The crew plans to delay cutting new holes for hatches until they have the replacement units on hand.18:57

Mais de Sailing Uma

We're Finally Setting Sail Again!09/20264 Hours to Rig Solar for an 8-Month Solo Circumnavigation09/2026Solar Sponsor Backed Out Before Sailing Around the World !09/2026Our boat won’t look the same after this | Step 49508/2026

De Sailing Uma — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.