RESTORATION of 45 year old Windlass GEARBOX

Name: RESTORATION of 45 year old Windlass GEARBOX
Uploaded: 2025-05-11T13:52:41.000Z
Duration: 25 min 3 s
Description: John restores a 45-year-old windlass by refinishing the gearbox and replacing seized fasteners with 316 stainless steel.

11. mai 2025 · 25 min · 11K visninger

Hva denne videoen dekker

Restoring a 45-year-old windlass requires a complete teardown, cleaning, and refinishing of the gearbox and motor housing.0:23 After stripping the original corroded finish, the cases receive four coats of Interprotect primer followed by a two-part Allcraft SE system consisting of Jet Black base coat and CS Matte clear coat.1:18 The internal gears are reassembled using new locating dowels, which require adjustment with a reamer for a precise fit.11:53 The assembly process involves sealing the motor housing with Honda Bond and using Permatex Seal and Lock on 316 stainless steel fasteners to prevent water ingress.13:41 A 3D-printed drill jig ensures accurate alignment for mounting holes.16:21 The crank arm and an old anchor are zinc-plated at Silver City Galvanizing to prevent further corrosion.9:11 After final assembly and a 24-hour cure for the RTV gasket sealant, the unit is tested under power to confirm the gypsy and capstan operate correctly.23:14 Restoring vintage marine hardware provides a cost-effective alternative to replacement while preserving original equipment.23:42