Living For Sail · vidéo

Ce que couvre cette vidéo

Restoring a 45-year-old windlass requires a complete teardown, cleaning, and refinishing of the gearbox and motor housing.0:23 After stripping the original corroded finish, the cases receive four coats of Interprotect primer followed by a two-part Allcraft SE system consisting of Jet Black base coat and CS Matte clear coat.1:18 The internal gears are reassembled using new locating dowels, which require adjustment with a reamer for a precise fit.11:53 The assembly process involves sealing the motor housing with Honda Bond and using Permatex Seal and Lock on 316 stainless steel fasteners to prevent water ingress.13:41 A 3D-printed drill jig ensures accurate alignment for mounting holes.16:21 The crank arm and an old anchor are zinc-plated at Silver City Galvanizing to prevent further corrosion.9:11 After final assembly and a 24-hour cure for the RTV gasket sealant, the unit is tested under power to confirm the gypsy and capstan operate correctly.23:14 Restoring vintage marine hardware provides a cost-effective alternative to replacement while preserving original equipment.23:42

Bateaux dans cette vidéo

Plus de vidéos de Living For Sail

BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boataoût 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!juil. 2026⛵️ This DIY Sailboat Repair Has To Work... Right?juin 2026Uh oh... 2 Reasons why there is No New Video Today...mai 2026

De Living For Sail — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.